Home >

Roger Raglin NFUSED® Weapons Cleaner/Lubricant Set - 16oz & 2oz

Roger Raglin NFUSED® Weapons Cleaner/Lubricant Set - 16oz & 2oz


 
Alternative Views:


Our Price: $26.95
Sale Price: $24.95
Savings: $2.00

Availability:: Usually Ships in 24 to 72 Hours
Qty:

Description
 
A highly effective gun cleaner safe for use around varnishes, wood gunstocks, camouflage finishes, polymer stocks and frames. Contains corrosion inhibitors to prevent flash rusting of freshly-cleaned firearms. Contains NO ammonia. After cleaning, use NFUSED® Lubricant for the ultimate lubrication and protection.

BENEFITS OF NFUSED®
  • Water Based
  • Contains corrosion inhibitors
  • Prevents flash rusting of freshly-cleaned
    firearms
  • Contains NO Ammonia
  • Can be used indoors

RESULTS:

  • No Solvent Smell
  • Removes old oils/lubricants
  • Friendly Cleaner

NFUSED® Weapons Lubricant

NFUSED® is a synthetic dry metal conditioner which molecularly bonds to heated gun metal making it self-lubricating under the toughest environmental conditions. Unlike traditional gun oils, NFUSED® protects the metal surface by a super tough regenerating hi density electro-chemical bonding process. NFUSED® is not a temporary coating. It seals and conditions the heated metal leaving a “dry” lubricated surface that reduces heat, improves performance and prevents jamming, and corrosion. Ease of cleaning is an added bonus!


BENEFITS OF NFUSED®

  • Near dry and constant lubrication
  • Minimal Material build-up
  • Highly concentrated
  • Permeates the metal surface
  • Corrosion inhibitors
  • Extreme temperature range

RESULTS:

  • Prevents jamming
  • Longer interval between cleanings
  • Inhibits corrosion
  • Ease of cleaning
  • Improved performance
  • Doesn’t gum up
  • Performs in harsh environments

NFUSED® Instructions for Weapon Applications

MAKE SURE FIREARM IS FULLY UNLOADED

Weapons Cleaning:
Spray into bore or action to dissolve and remove fouling, oil, and grease.
Brush heavy deposits and reapply to rinse away fouling.
Wipe dry. After cleaning, use NFUSED® lubricant
for the ultimate lubrication and protection.

Weapons Lubrication:

Apply a very thin film (4-6 drops of NFUSED) to cotton lint-free cloth/patch to all clean metal surfaces of the firearm.
Let NFUSED® absorb into metal for 10 to 15 minutes. Heat quickens the process such as a hair dryer, heat gun, etc.
Let metal surfaces cool. Reapply and heat again.
After three initial applications, re-lubricate every 1-2 thousand rounds fired.
Wipe completely to avoid sand and dust contamination.



Share your knowledge of this product. Be the first to write a review »